The best impact wrenches for car work
One maker publishes two torque figures and the rest publish one. Breakaway torque is what frees a seized lug nut; fastening torque is the number you must never use on one. Almost nobody labels which they are quoting.
By Sawyer V. · Published · How we research
We have not tested any of this. Everything below is compiled from published manufacturer specifications, and the arithmetic is printed so you can check it. This page carries affiliate links: if you buy through one we earn a commission at no extra cost to you, and it does not change the order of the picks. Full disclosure.
The verdict
Buy the DEWALT DCF900P1 kit, about $244. DEWALT is the only maker here that publishes both numbers: 1,030 ft-lbs of maximum fastening torque and 1,400 ft-lbs of maximum breakaway torque. Breakaway is the figure that decides whether a lug nut an air gun put on three winters ago comes off, and it is the one almost every competitor omits. This version includes a 5.0 Ah battery and charger, which is why it beats the more powerful bare tool below it. Prices as of November 21, 2026.
For a car rather than a truck, the CRAFTSMAN V20 at about $114 is enough tool - 275 ft-lbs of fastening torque is roughly three times what a wheel nut is tightened to. And before you buy any of them: a $25 breaker bar removes the same lug nuts, slowly, with no battery.
| # | Pick | Install | Score | Price |
|---|---|---|---|---|
| 1 | DEWALT DCF900P1 Impact Wrench Kit The same two figures, with a battery in the box | Drops in | 9.4/10 | $244.00 - view on Amazon |
| 2 | CRAFTSMAN V20 CMCF921B Impact Wrench Enough torque for a car, and nothing like enough marketing | Drops in | 9.0/10 | $114.00 - view on Amazon |
| 3 | CRAFTSMAN CMEF901 Corded Impact Wrench No battery platform to buy into | Plugs in | 9.4/10 | $129.00 - view on Amazon |
| 4 | DEWALT DCF961B 20V MAX XR Impact Wrench The two published torque figures, and a mode that limits them | Drops in | 9.4/10 | $262.56 - view on Amazon |
| 5 | EPAuto 1/2 in. Drive Click Torque Wrench The same published accuracy for less | Drops in | 8.3/10 | $36.87 - view on Amazon |
Prices last verified November 21, 2026. They move constantly; the figure on Amazon when you click is the real one.

Fastening torque and breakaway torque are different numbers
This is the whole page. An impact wrench does two jobs and they need different amounts of force. Driving a fastener tight is fastening torque. Shocking a stuck one loose is breakaway torque, and it is always the larger figure because a corroded or over-torqued nut resists far more than it took to install.
You are buying the tool for breakaway. You are buying it because a wheel nut will not move. And across this category the figure printed largest on the box is fastening torque, or an unlabeled number that could be either.
| Tool | Max fastening torque | Max breakaway torque | Power | Warranty | Price checked Nov 21 |
|---|---|---|---|---|---|
| DEWALT DCF900P1 (kit) | 1,030 ft-lbs | 1,400 ft-lbs | 20V MAX, battery included | 3-year limited | $244.00 |
| CRAFTSMAN V20 CMCF921B | 275 ft-lbs | Not published | V20, bare tool | 3-year limited | $114.00 |
| CRAFTSMAN CMEF901 (corded) | 450 ft-lbs, not labeled | Not published | 7.5 A mains | 3-year limited | $129.00 |
| DEWALT DCF961B (bare) | 1,320 ft-lbs | 1,900 ft-lbs | 20V MAX, bare tool | 3-year limited | $262.56 |
| EPAuto 1/2 in torque wrench | Not applicable | Not applicable | None | See product card | $36.87 |
Two of these four impact wrenches publish both figures and both are DEWALT. CRAFTSMAN publishes one number for each of its tools and does not say which kind it is. Below these brands the picture gets worse: the $75 to $95 no-name 21-volt guns advertise 1,500 N·m and 2,000 N·m with no labeling and no test standard at all, and we have not carded any of them for that reason.
The honest alternative, stated first
A breaker bar is a long non-ratcheting handle on a 1/2-inch drive. It costs about $25, it has no battery, it never needs charging, and with a 24-inch handle and your body weight it applies several hundred pound-feet to a stuck lug nut. For somebody who swaps wheels twice a year it does the job completely.
What you buy an impact wrench for is time and repetition: twenty nuts off and twenty back on takes minutes rather than most of an hour, and it does the work in positions where you cannot get leverage. If you run winter and summer sets on two cars, that is a real case. If you change one wheel a year, buy the breaker bar and spend the rest on jack stands.
Bare tool, kit, or cord
Three of these four are sold without a battery, and on a tool used a few times a year that is a much bigger decision than the torque figure.
- Bare tool (DCF961B, CMCF921B) assumes you already own batteries on the platform. If you do not, add a battery and charger to the price, which is commonly a further hundred dollars or more and often changes which tool is actually cheapest
- Kit (DCF900P1) includes a 5.0 Ah battery, charger and bag. It is why the less powerful DEWALT ranks above the more powerful one here: for someone with no platform, it is the cheaper route to a working tool
- Corded (CMEF901) has no battery to be flat in a cold garage in February, which is exactly when you want it. The cost is a cord: the wheel you need is often the one furthest from the outlet
Who each one is for
- DEWALT DCF900P1 - for a complete tool with both figures published. 1,030 ft-lbs fastening, 1,400 ft-lbs breakaway, four speed modes, hog ring anvil, and a battery and charger in the box. Skip it if you want a torque-limiting mode: its four modes are speeds, not limits
- CRAFTSMAN V20 CMCF921B - for a car, at half the money. 275 ft-lbs fastening torque, mid-torque and light enough to use one-handed under an arch, with a 3-year limited warranty. Skip it if your nuts have been put on by a shop air gun and left for years: CRAFTSMAN publishes no breakaway figure, so there is no way to know in advance whether it will free them
- CRAFTSMAN CMEF901 - for no platform and no flat batteries. 450 ft-lbs maximum torque from a 7.5 A mains motor, 2,700 IPM, 2,200 RPM variable speed and a hog ring anvil, with nothing to charge. Skip it if you work at the roadside or away from an outlet, and note CRAFTSMAN does not label which kind of torque the 450 is
- DEWALT DCF961B - for the one safety feature in the category. The highest published figures here at 1,320 and 1,900 ft-lbs, and - far more usefully - a Precision Wrench Mode designed to prevent over-tightening and fastening run-off. Skip it on price and on form: it is a bare tool, it is the most expensive thing on this page, and 1,900 ft-lbs of breakaway will shear a stud if you are careless
- EPAuto 1/2 in torque wrench - buy this too. See the skip note. It is the companion, not the alternative
Impact sockets, not chrome ones
One safety point that costs nothing to get right. Chrome-plated hand sockets - the kind in every mechanics set, including the ones we rank under $100 - are hardened for steady torque, not for the hammer blows an impact wrench delivers. Under impact they can crack and throw chrome. Impact sockets are black, thicker-walled and made from a softer, more ductile alloy for exactly this reason, and they are sold separately from almost every tool on this page.
Two more things worth owning before you own an impact wrench: a torque wrench for putting the wheel back, and jack stands and chocks, because a jack is a lifting device and is not what should be holding a car up while you are beside it.
Every pick, with the working
Each entry lists the specifications the maker publishes, the axis scores those specifications produce, and what you give up. Rows that read “Not published” are not omissions on our side: they are things the maker will not commit to in writing, and they cost the product points on the transparency axis. Specifications compiled September 4, 2026.
Our pickThe same two figures, with a battery in the box
DEWALT DCF900P1 Impact Wrench Kit
1,030 ft-lbs of maximum fastening torque and 1,400 ft-lbs of maximum breakaway torque, four speed modes, and - the reason to choose this over the bare tool - a 5.0 Ah battery and charger included. If you own nothing on the 20V MAX platform, this is the cheaper way in, even though the tool itself is less powerful than the DCF961.
- Drive
- 1/2 in, hog ring anvil
- Max fastening torque
- 1,030 ft-lbs
- Max breakaway torque
- 1,400 ft-lbs
- Modes
- 4 speed settings, variable-speed trigger
- In the box
- Tool, one 5.0 Ah battery, charger, kit bag
- Platform
- 20V MAX
- Warranty
- 3-year limited, 1-year free service, 90-day satisfaction
- Torque-limiting mode
- None
- Weight
- Not published
What it gets right
- Publishes fastening and breakaway torque separately: 1,030 and 1,400 ft-lbs
- Includes a 5.0 Ah battery, a charger and a kit bag - no platform required
- Four speed modes and a variable-speed trigger for control on smaller fasteners
- Hog ring anvil, so sockets come on and off without a detent pin
- 3-year limited warranty, 1 year free service, 90 days satisfaction guaranteed
Flaws
- Expensive for a tool most car owners use twice a year
- No precision or anti-run-off mode: the four modes are speeds, not torque limits
- Max fastening torque is more than ten times a typical lug nut specification, so a torque wrench is still mandatory
- No published weight on the product page
The working behind the 9.4
- Heat headroom: not scored (weight 22%)
- The maker publishes no operating-temperature ceiling, so this axis is dropped and the other weights are re-normalized.
- Install effort: 10.0 (weight 24%)
- Drops in and sits there. No fixing of any kind, and it comes out again when you sell the car.
- Price against the ceiling: not scored (weight 24%)
- No published list price we could cite on the compile date, so this axis is dropped and the other weights are re-normalized.
- Written commitment: 9.0 (weight 15%)
- 36-month warranty. This is the only promise in the entire listing that a court would read, which is why it is scored and the marketing copy is not.
- Spec transparency: 8.9 (weight 15%)
- 8 of the 9 specifications we went looking for are published by the maker (89%). A blank row is never a guess here: it prints “Not published” and it costs the product points, because a figure nobody will commit to in writing is a figure you cannot check.
Axes with no published input are dropped and the remaining weights re-normalized, so a product is not punished for a category where an axis does not apply. Specifications compiled September 4, 2026 from DEWALT's DCF900P1 kit page.
2Enough torque for a car, and nothing like enough marketing
CRAFTSMAN V20 CMCF921B Impact Wrench
275 ft-lbs of maximum fastening torque, which is roughly three times what a lug nut is tightened to and the right size of tool for a car rather than a truck chassis. CRAFTSMAN publishes one figure where DEWALT publishes two, and the missing one - breakaway torque - is the figure that decides whether it will free a nut an air gun put on.
- Drive
- 1/2 in, hog ring anvil
- Max fastening torque
- 275 ft-lbs
- Max breakaway torque
- Not published
- Class
- Mid-torque
- Control
- Variable-speed trigger
- Platform
- V20, battery and charger not included
- Warranty
- 3-year limited
- Weight
- Not published
What it gets right
- 275 ft-lbs max fastening torque, published - comfortably more than a passenger car wheel needs
- Mid-torque and lightweight, which makes it usable one-handed under a wheel arch
- Hog ring anvil and a variable-speed trigger for control in tight spaces
- 3-year limited warranty
- Roughly half the price of the DEWALT kit, on a platform sold everywhere
Flaws
- CRAFTSMAN publishes no breakaway torque figure, which is the number that matters for removal
- Bare tool: no battery, no charger
- Mid-torque means a genuinely seized or over-torqued lug nut may defeat it where the DEWALT will not
- No published weight on the product page
The working behind the 9.0
- Heat headroom: not scored (weight 22%)
- The maker publishes no operating-temperature ceiling, so this axis is dropped and the other weights are re-normalized.
- Install effort: 10.0 (weight 24%)
- Drops in and sits there. No fixing of any kind, and it comes out again when you sell the car.
- Price against the ceiling: not scored (weight 24%)
- No published list price we could cite on the compile date, so this axis is dropped and the other weights are re-normalized.
- Written commitment: 9.0 (weight 15%)
- 36-month warranty. This is the only promise in the entire listing that a court would read, which is why it is scored and the marketing copy is not.
- Spec transparency: 7.5 (weight 15%)
- 6 of the 8 specifications we went looking for are published by the maker (75%). A blank row is never a guess here: it prints “Not published” and it costs the product points, because a figure nobody will commit to in writing is a figure you cannot check.
Axes with no published input are dropped and the remaining weights re-normalized, so a product is not punished for a category where an axis does not apply. Specifications compiled September 4, 2026 from CRAFTSMAN's CMCF921B product page.
3No battery platform to buy into
CRAFTSMAN CMEF901 Corded Impact Wrench
450 ft-lbs of maximum torque from a 7.5 amp mains motor, with 2,700 impacts per minute and a 2,200 RPM variable-speed trigger. It has no battery to go flat in a cold garage and no platform to commit to, which for a tool used twice a year is the sensible trade. The cable is the cost: you are tethered to an extension lead on the driveway.
- Drive
- 1/2 in, hog ring anvil
- Max torque
- 450 ft-lbs, fastening or breakaway not stated
- Motor
- 7.5 A, corded mains
- Impact rate
- 2,700 IPM
- Speed
- 2,200 RPM maximum, variable-speed trigger
- Warranty
- 3-year limited
- Battery
- None required
- Weight
- Not published
What it gets right
- 450 ft-lbs max torque, published, from a 7.5 A mains motor
- Published 2,700 IPM and 2,200 RPM with a variable-speed trigger
- No battery, so nothing goes flat between the two times a year you use it
- Hog ring anvil, 3-year limited warranty
- Cheaper than the cordless kits once you count the battery and charger they do not include
Flaws
- Corded. The wheel you need to reach is often the one furthest from the outlet
- CRAFTSMAN publishes one torque figure and does not label it fastening or breakaway
- Mains tools are heavier in the hand than a brushless cordless of the same class
- No published weight on the product page
The working behind the 9.4
- Heat headroom: not scored (weight 22%)
- The maker publishes no operating-temperature ceiling, so this axis is dropped and the other weights are re-normalized.
- Install effort: 10.0 (weight 24%)
- Plugs into a 12V socket or a USB port. Nothing to mount, nothing to route, reversible in a second.
- Price against the ceiling: not scored (weight 24%)
- No published list price we could cite on the compile date, so this axis is dropped and the other weights are re-normalized.
- Written commitment: 9.0 (weight 15%)
- 36-month warranty. This is the only promise in the entire listing that a court would read, which is why it is scored and the marketing copy is not.
- Spec transparency: 8.8 (weight 15%)
- 7 of the 8 specifications we went looking for are published by the maker (88%). A blank row is never a guess here: it prints “Not published” and it costs the product points, because a figure nobody will commit to in writing is a figure you cannot check.
Axes with no published input are dropped and the remaining weights re-normalized, so a product is not punished for a category where an axis does not apply. Specifications compiled September 4, 2026 from CRAFTSMAN's CMEF901 product page.
4The two published torque figures, and a mode that limits them
DEWALT DCF961B 20V MAX XR Impact Wrench
DEWALT publishes both numbers that matter and nobody else does: 1,320 ft-lbs of maximum fastening torque and 1,900 ft-lbs of maximum breakaway torque. Breakaway is the figure that gets a seized lug nut moving; fastening is the figure you must never use on one. It also has a Precision Wrench Mode specifically to stop over-tightening, which is the one safety feature in this category.
- Drive
- 1/2 in, hog ring anvil
- Max fastening torque
- 1,320 ft-lbs
- Max breakaway torque
- 1,900 ft-lbs
- Modes
- 3 speeds plus Precision Wrench Mode
- Motor
- Brushless
- Platform
- 20V MAX, battery and charger not included
- Warranty
- 3-year limited, 1-year free service, 90-day satisfaction
- Weight
- Not published
What it gets right
- Publishes fastening AND breakaway torque separately - 1,320 and 1,900 ft-lbs - where the rest of the category publishes one unlabelled number
- Precision Wrench Mode is designed to prevent over-tightening and fastening run-off
- Three speed settings plus the precision mode, on a hog ring anvil for fast socket changes
- 3-year limited warranty, 1 year free service and 90 days satisfaction guaranteed
- Brushless, on the 20V MAX platform most DIY garages already own something from
Flaws
- Bare tool. No battery and no charger, which is a further hundred dollars or more if you own nothing on the platform
- The most expensive thing on this page by some margin
- 1,900 ft-lbs of breakaway is far beyond anything a passenger car needs and it will shear a stud if you are careless
- No published weight on the product page
The working behind the 9.4
- Heat headroom: not scored (weight 22%)
- The maker publishes no operating-temperature ceiling, so this axis is dropped and the other weights are re-normalized.
- Install effort: 10.0 (weight 24%)
- Drops in and sits there. No fixing of any kind, and it comes out again when you sell the car.
- Price against the ceiling: not scored (weight 24%)
- No published list price we could cite on the compile date, so this axis is dropped and the other weights are re-normalized.
- Written commitment: 9.0 (weight 15%)
- 36-month warranty. This is the only promise in the entire listing that a court would read, which is why it is scored and the marketing copy is not.
- Spec transparency: 8.8 (weight 15%)
- 7 of the 8 specifications we went looking for are published by the maker (88%). A blank row is never a guess here: it prints “Not published” and it costs the product points, because a figure nobody will commit to in writing is a figure you cannot check.
Axes with no published input are dropped and the remaining weights re-normalized, so a product is not punished for a category where an axis does not apply. Specifications compiled September 4, 2026 from DEWALT's DCF961B product page.
5The same published accuracy for less
EPAuto 1/2 in. Drive Click Torque Wrench
Skip this one. It is not an impact wrench and it is on this page because buying one of the four above without one is the mistake this whole category invites. An impact wrench takes wheels OFF. Putting them back on is a torque-wrench job to a figure in your owner's manual - normally somewhere around 80 to 100 lb-ft - and an impact gun rated to 1,320 lb-ft of fastening torque will stretch a stud or warp a brake disc long before anything feels tight. Budget for both or buy neither.
Publishes the same plus or minus 4% pre-calibrated accuracy over the same 10-150 ft-lb range, for meaningfully less money. On the published numbers the only thing separating it from the LEXIVON is the serial-numbered calibration certificate in the box, which is worth saying plainly on a page about a category where price usually implies precision.
- Accuracy
- Plus or minus 4%, pre-calibrated
- Range
- 10-150 ft-lb
- Drive
- 1/2 inch
- Type
- Click
- Calibration interval
- Not published
- Warranty
- Not published
- List price
- Not published
What it gets right
- Published accuracy of plus or minus 4%, stated as pre-calibrated
- Published 10-150 ft-lb range on 1/2 in drive — the same working span as more expensive wrenches
- Supplied in a case, which is how a torque wrench should be stored
- The cheapest route to actually torquing lug nuts rather than guessing with a breaker bar
Flaws
- No published calibration certificate or traceability behind the stated accuracy
- Same storage rule as any click wrench: wind it back to the bottom of its range or it drifts
- Nothing published about recalibration service, so a drifted wrench is a replacement
- No warranty published
The working behind the 8.3
- Heat headroom: not scored (weight 22%)
- The maker publishes no operating-temperature ceiling, so this axis is dropped and the other weights are re-normalized.
- Install effort: 10.0 (weight 24%)
- Drops in and sits there. No fixing of any kind, and it comes out again when you sell the car.
- Price against the ceiling: not scored (weight 24%)
- No published list price we could cite on the compile date, so this axis is dropped and the other weights are re-normalized.
- Written commitment: not scored (weight 15%)
- No warranty term published, so this axis is dropped and the other weights are re-normalized.
- Spec transparency: 5.7 (weight 15%)
- 4 of the 7 specifications we went looking for are published by the maker (57%). A blank row is never a guess here: it prints “Not published” and it costs the product points, because a figure nobody will commit to in writing is a figure you cannot check.
Axes with no published input are dropped and the remaining weights re-normalized, so a product is not punished for a category where an axis does not apply. Specifications compiled September 4, 2026 from EPAuto click torque wrench published manual and specifications.
Prices last verified November 21, 2026. They move constantly; the figure on Amazon when you click is the real one.
Questions people actually ask
What size impact wrench do I need to remove lug nuts?
A 1/2-inch drive, and the figure to look at is breakaway torque rather than fastening torque. Passenger-car lug nuts are commonly tightened to around 80 to 100 lb-ft, but a nut that a tire shop’s air gun installed and that has then corroded for a few winters resists far more. DEWALT publishes 1,400 ft-lbs of breakaway on the DCF900 and 1,900 on the DCF961; CRAFTSMAN publishes no breakaway figure at all.
What is the difference between fastening torque and breakaway torque?
Fastening torque is how hard the tool can drive a fastener tight. Breakaway torque is how hard it can shock a stuck one loose, and it is always the larger number. You buy an impact wrench for breakaway and the box usually advertises fastening - or an unlabeled figure that could be either. DEWALT publishes both on both of its tools here, which is why they rank where they do.
Can you use an impact wrench to tighten lug nuts?
You should not. Every tool on this page can apply between three and sixteen times a typical wheel’s specified torque, and over-tightening stretches studs and warps brake discs - damage you discover as a vibration months later. Use the impact wrench to remove and to run the nuts up finger-tight, then finish with a torque wrench to the figure in your owner’s manual. One tool here, the DEWALT DCF961B, has a mode specifically intended to prevent over-tightening.
Do I need an impact wrench or will a breaker bar do?
For one or two wheel changes a year, a breaker bar does the same job for about $25 with no battery and nothing to charge. An impact wrench buys speed and repetition - twenty nuts off and back on in minutes instead of most of an hour - which is worth it if you run winter and summer sets, or more than one car. Buy the breaker bar first and find out whether you actually want the gun.
Can I use normal sockets with an impact wrench?
No. Chrome hand sockets are hardened for steady torque and can crack under the hammer blows an impact wrench delivers. Impact sockets are black, thicker-walled and made from a more ductile alloy so they deform rather than shatter. They are sold separately from essentially every tool on this page, so budget for a set in the sizes your wheels use - commonly 17, 19 or 21 mm.
Sources
- Published fastening and breakaway torque, speed modes and kit contents for the DEWALT DCF900P1
- Published fastening and breakaway torque and Precision Wrench Mode for the DEWALT DCF961B
- Published maximum fastening torque, anvil type and warranty for the CRAFTSMAN CMCF921B
- Published maximum torque, amperage, impact rate and speed for the CRAFTSMAN CMEF901