The best car phone mounts for a phone with a PopSocket
A grip in the middle of the back of your phone rules out MagSafe, wireless charging and every adhesive plate in one move. It also rules out the car mount PopSockets makes, and their own listing says so.
By Sawyer V. · Published · How we research
We have not tested any of this. Everything below is compiled from published manufacturer specifications, and the arithmetic is printed so you can check it. This page carries affiliate links: if you buy through one we earn a commission at no extra cost to you, and it does not change the order of the picks. Full disclosure.
The verdict
Buy the pop-tech vent mount, about $13. It is the only mount on this page that publishes a number for the thing you are trying to fit: a deep U-shaped cutout that takes flat grips under 0.3 in and thick grips at 0.3 in and above, on a four-point vent clip stated to reach 0.33 in further than comparable clips. Prices as of November 7, 2026.
Do not buy a MagSafe car mount, including PopSockets' own. The PopSockets Car Vent Mount works with MagSafe PopGrips and MagSafe-compatible cases, and its listing states plainly that it is not compatible with PopWallets or non-MagSafe grips. If what is on your phone is a classic collapsible PopSocket, the maker's own mount is the wrong product.
| # | Pick | Install | Score | Price |
|---|---|---|---|---|
| 1 | pop-tech Car Vent Phone Mount for Thick Socket Grip The only mount here that publishes a grip thickness | Clips on | 9.0/10 | $12.99 - view on Amazon |
| 2 | JCTRIWAY Car Mount for Pop Socket A published hold figure, off the vents | Suction | 7.3/10 | $16.99 - view on Amazon |
| 3 | Lamicall Wider Clamp Vent Phone Holder (STCD06) The most published fitment numbers of any mount here | Clips on | 8.9/10 | $14.99 - view on Amazon |
| 4 | vanva Universal Air Vent Car Mount A screw clamp and 24 months, for ten dollars | Clips on | 8.6/10 | $9.99 - view on Amazon |
| 5 | PopSockets Car Vent Phone Mount MagSafe PopGrips only - read the compatibility line | Clips on | 8.3/10 | $14.99 - view on Amazon |
| 6 | OtterBox Performance Car Dash and Windshield Mount for MagSafe A lifetime warranty on the wrong mechanism for this page | Suction | 7.9/10 | $40.46 - view on Amazon |
Prices last verified November 7, 2026. They move constantly; the figure on Amazon when you click is the real one.
What a grip on the back actually rules out
A collapsible grip is a disc of adhesive and a concertina stalk, and it sits almost exactly where every modern car mount wants to make contact. Three whole categories stop working.
- MagSafe and every magnetic mount. Magnets need the back of the case flat against the mount. A grip holds the phone a centimeter off it, and magnetic force falls away fast with distance
- Wireless charging, in the car and everywhere else. The coil has to be close and aligned. A grip is in exactly the wrong spot
- Adhesive plate mounts. The plate has nowhere to go that is not already occupied
What still works is a cradle: something that holds the phone by its edges and leaves the back alone. The products on this page are cradles, and two of them are cradles with a deliberate hole in the middle for the grip to sit in.
Thick case and thick grip are not the same claim
Search for this and half the results are mounts advertised as thick case friendly. That is a different measurement and it is worth separating, because a cradle can clear a chunky case and still fail on a grip.
- A thick case makes the whole phone deeper and wider. A cradle solves it with a wider clamp and a deeper foot. Lamicall publishes real numbers for this: a hook extension of 10 to 29 mm, a vent blade ceiling under 4.2 mm, and a phone size range of 4.7 to 6.8 in
- A grip is a local bump in the center of the back. A cradle solves it only by having clearance behind the phone, or a shaped recess for the grip to drop into. Two products here are designed around that, and they are the two at the top
The five that work, and the one that does not
| Mount | How it clears the grip | Position | Published warranty | Price |
|---|---|---|---|---|
| pop-tech vent mount | Deep U cutout; grips under and over 0.3 in | Vent or adhesive | None published | $12.99 |
| JCTRIWAY socket mount | U-shaped cradle for bulky grips | Suction, dash or glass | 6 months | $16.99 |
| Lamicall wider clamp | Wide arms and an adjustable foot | Vent | 1 year | $14.99 |
| vanva vent mount | Cradle with a support shelf | Vent | 24 months | $9.99 |
| PopSockets Car Vent Mount | Only MagSafe PopGrips | Vent | None published | $14.99 |
| OtterBox Performance MagSafe | It does not - see the skip | Suction or dash disc | Limited lifetime | $40.46 |
Who each one is for
- pop-tech vent mount - for a classic collapsible grip, on a vent. The only product here that publishes a grip-thickness threshold, with a recess shaped for the expanded grip so the phone sits upright instead of tipping. The clip is stated to reach 0.33 in further than comparable clips, which is what wide vents need, and two adhesive pads are in the box as an alternative. Skip it if a warranty matters to you: the listing's warranty field reads No
- JCTRIWAY socket mount - for a car with round or weak vents. The same U-shaped socket cradle on a suction base, with a published holding figure of 44 lb, a 270-degree telescopic arm and 3M pads for a dash position. A grip adds weight and leverage, and a windshield cup carries that better than a vent blade does. Skip it if your dash gets very hot: heat is what releases suction cups
- Lamicall wider clamp - for a thick case rather than a tall grip. The most completely specified mount on this page - hook extension, vent blade ceiling, phone size range, an operating range of -4 F to 194 F - plus a 1-year warranty and a stated exclusion (not for round vents). Read the claim precisely though: it is thick, wallet and battery cases, not a protruding grip. A collapsed grip clears the adjustable foot; an expanded one is not what Lamicall is promising. Skip it if your grip does not collapse flat
- vanva vent mount - for ten dollars and the longest warranty. A 24-month published term, the longest in this group, on a cradle whose vent clamp tightens with a screw rather than a spring - the right mechanism for a phone made heavier by a grip. Skip it if you want anything published about grips specifically, because the whole fitment claim is big phones and thick cases
- PopSockets Car Vent Mount - only if your grip is a MagSafe PopGrip. If you have one of the MagSafe PopGrips or a MagSafe case, this is the mount PopSockets designed for it, with rotating prongs so the vent gap is set rather than hoped at. Skip it for a classic grip or a PopWallet - PopSockets says so itself
- OtterBox Performance for MagSafe - no, not with a grip. See the skip note above
The honest alternative: take the grip off
There is a version of this question where the answer is to stop solving it. A MagSafe ecosystem - mount, charger, wallet - is better in a car than any cradle, and a grip is what stands between you and it.
Two routes if you want that. MagSafe PopGrips exist and attach magnetically rather than with adhesive, so the grip comes off when you get in the car and the magnets reach the case: PopSockets' own vent mount is built for exactly that arrangement. Or drop the grip and buy a magnetic mount outright - best MagSafe car mounts is the page, and magnetic vs clamp car mounts makes the general case between the two mechanisms.
If you are keeping the grip, two related pages are worth a look: best mounts for big phones covers the other fitment problem cradles have to solve, and why your phone mount keeps falling is the page to read before you blame the mount - a grip changes where the weight sits, and that changes which failures you get.
Every pick, with the working
Each entry lists the specifications the maker publishes, the axis scores those specifications produce, and what you give up. Rows that read “Not published” are not omissions on our side: they are things the maker will not commit to in writing, and they cost the product points on the transparency axis. Specifications compiled September 4, 2026.
Our pickThe only mount here that publishes a grip thickness
pop-tech Car Vent Phone Mount for Thick Socket Grip
A vent mount with a deep U-shaped cutout designed around an expanded grip, and the only product in this group that publishes a number for the thing you are trying to fit: flat grips under 0.3 in and thick grips at 0.3 in or more. It also publishes a clip length - 0.33 in longer than the mounts it is comparing itself to - and a soft PU face so it does not scuff the grip. There is no warranty at all.
- Grip accommodation
- U-shaped cutout; flat under 0.3 in, thick 0.3 in and above
- Attachment
- Four-point vent clip, plus 2 x 35 mm adhesive pads
- Clip reach
- Stated 0.33 in longer than comparable clips
- Vent orientations
- Horizontal, vertical, sideways
- Adjustment
- 360-degree ball joint
- Face material
- Soft PU
- Warranty
- Not published
- Load rating
- Not published
List price $12.99 per Amazon listing, November 7, 2026, captured on the compile date below. Not a live price and not what you will pay — the button is where the real number is.
What it gets right
- Publishes a grip-thickness threshold: flat under 0.3 in, thick at 0.3 in and above
- Deep U-shaped cutout that accepts the expanded grip rather than fighting it
- Four-point vent clip, published as 0.33 in longer than comparable clips, for wide vents
- Soft PU face, stated not to scratch the grip
- Includes two 35 mm adhesive pads as an alternative to the vent clip
- Works with vertical, horizontal and sideways vents, stated
Flaws
- No warranty - the listing's warranty field reads No
- A vent mount still hangs weight off a vent blade, and old plastic vents break
- pop-tech is a listing brand, not a maker with a service channel
- No load rating or hold figure published
The working behind the 9.0
- Heat headroom: not scored (weight 22%)
- The maker publishes no operating-temperature ceiling, so this axis is dropped and the other weights are re-normalized.
- Install effort: 9.0 (weight 24%)
- Clips onto a vent blade or a headrest post. Two minutes, no tools, no adhesive, no residue.
- Price against the ceiling: 10.0 (weight 24%)
- Listed at $12.99 on the compile date. This site's buyer has a practical ceiling around $150 for a single upgrade, so the scale rewards everything under $100 and falls away sharply past $150. The live price is very often different, and that is what the button is for.
- Written commitment: not scored (weight 15%)
- No warranty term published, so this axis is dropped and the other weights are re-normalized.
- Spec transparency: 7.5 (weight 15%)
- 6 of the 8 specifications we went looking for are published by the maker (75%). A blank row is never a guess here: it prints “Not published” and it costs the product points, because a figure nobody will commit to in writing is a figure you cannot check.
Axes with no published input are dropped and the remaining weights re-normalized, so a product is not punished for a category where an axis does not apply. Specifications compiled September 4, 2026 from the pop-tech vent mount listing.
2A published hold figure, off the vents
JCTRIWAY Car Mount for Pop Socket
The same U-shaped socket cradle on a suction base instead of a vent clip, with a published holding figure of 44 lb (20 kg) and a 6-month warranty. The suction route matters more than it sounds for this buyer: a phone with a grip on the back is heavier and further from the mount than a bare phone, and a windshield or dash cup does not put that leverage on a vent blade.
- Grip accommodation
- U-shaped cradle, stated for thick and bulky grips
- Attachment
- Suction cup with gel adhesive, plus 3M pads
- Published hold
- 44 lb (20 kg), no test method stated
- Adjustment
- 270-degree telescopic arm, 360-degree ball joint
- Face material
- Soft PVC
- Warranty
- 6 months
- Operating range
- Not published
- Grip thickness limit
- Not published
List price $16.99 per Amazon listing, November 7, 2026, captured on the compile date below. Not a live price and not what you will pay — the button is where the real number is.
What it gets right
- Publishes a holding figure: 44 lb (20 kg)
- U-shaped socket cradle stated to fit thicker and bulky grips, not only flat swappable tops
- 6-month warranty published, where the vent rival publishes none
- 270-degree telescopic arm plus a 360-degree ball joint
- Soft PVC face, stated not to scratch the grip; 3M pads included for dash use
Flaws
- No test method published for the 44 lb figure
- A suction cup on a dashboard is a summer problem - heat is what releases them
- 6 months is a short term for a mount, against lifetime from Arkon and Scosche
- JCTRIWAY is a listing brand
The working behind the 7.3
- Heat headroom: not scored (weight 22%)
- The maker publishes no operating-temperature ceiling, so this axis is dropped and the other weights are re-normalized.
- Install effort: 7.0 (weight 24%)
- Suction cup onto glass or a dash disc. Reversible, but it wants a clean surface and it is the mount type most likely to let go on a hot day.
- Price against the ceiling: 10.0 (weight 24%)
- Listed at $16.99 on the compile date. This site's buyer has a practical ceiling around $150 for a single upgrade, so the scale rewards everything under $100 and falls away sharply past $150. The live price is very often different, and that is what the button is for.
- Written commitment: 3.0 (weight 15%)
- 6-month warranty. This is the only promise in the entire listing that a court would read, which is why it is scored and the marketing copy is not.
- Spec transparency: 7.5 (weight 15%)
- 6 of the 8 specifications we went looking for are published by the maker (75%). A blank row is never a guess here: it prints “Not published” and it costs the product points, because a figure nobody will commit to in writing is a figure you cannot check.
Axes with no published input are dropped and the remaining weights re-normalized, so a product is not punished for a category where an axis does not apply. Specifications compiled September 4, 2026 from the JCTRIWAY socket mount listing.
3The most published fitment numbers of any mount here
Lamicall Wider Clamp Vent Phone Holder (STCD06)
Lamicall publishes what nobody else does: the hook extension range (10 to 29 mm), the maximum vent blade thickness it will clamp (under 4.2 mm), the phone size range (4.7 to 6.8 in) and an operating range of -4 F to 194 F. It also says plainly that it is not suitable for round vents. The claim is thick cases, wallet cases and battery cases, with a fully adjustable foot - which is case thickness, not a protruding grip, and that distinction is the whole reason to read the row below.
- Grip accommodation
- Thick, wallet and battery cases, per the listing
- Attachment
- 4-lock vent clip, horizontal or vertical blades
- Hook extension
- 10 mm to 29 mm
- Max vent blade thickness
- Under 4.2 mm
- Phone size range
- 4.7 in to 6.8 in
- Operating range
- -4 F to 194 F
- Stated exclusion
- Not suitable for round vents
- Warranty
- 1 year
- Load rating
- Not published
List price $14.99 per Amazon listing, November 7, 2026, captured on the compile date below. Not a live price and not what you will pay — the button is where the real number is.
What it gets right
- Publishes hook extension range (10 to 29 mm) and maximum vent blade thickness (under 4.2 mm)
- Publishes an operating range: -4 F to 194 F
- Publishes a phone size range: 4.7 to 6.8 in
- 1-year warranty published
- States its own exclusion: not suitable for round vents
- Silicone back layer and a fully adjustable foot, for a phone that does not sit flat
Flaws
- The claim is thick cases, wallet cases and battery cases - not a protruding grip. A collapsed grip clears it; an expanded one is not what is claimed
- No load rating published
- Vent-only. If your vents are round or weak, nothing in the specification helps
- A side clamp needs two hands more often than a magnet does
The working behind the 8.9
- Heat headroom: 10.0 (weight 22%)
- Published operating ceiling 90 C (194 F). A car parked in summer sun runs roughly 60-70 C inside, so 65 C and up is real headroom, 60 C is living at the limit, and anything under 55 C is a summer problem waiting to happen.
- Install effort: 9.0 (weight 24%)
- Clips onto a vent blade or a headrest post. Two minutes, no tools, no adhesive, no residue.
- Price against the ceiling: 10.0 (weight 24%)
- Listed at $14.99 on the compile date. This site's buyer has a practical ceiling around $150 for a single upgrade, so the scale rewards everything under $100 and falls away sharply past $150. The live price is very often different, and that is what the button is for.
- Written commitment: 5.5 (weight 15%)
- 12-month warranty. This is the only promise in the entire listing that a court would read, which is why it is scored and the marketing copy is not.
- Spec transparency: 8.9 (weight 15%)
- 8 of the 9 specifications we went looking for are published by the maker (89%). A blank row is never a guess here: it prints “Not published” and it costs the product points, because a figure nobody will commit to in writing is a figure you cannot check.
Axes with no published input are dropped and the remaining weights re-normalized, so a product is not punished for a category where an axis does not apply. Specifications compiled September 4, 2026 from the Lamicall STCD06 listing.
4A screw clamp and 24 months, for ten dollars
vanva Universal Air Vent Car Mount
Ten dollars for a cradle mount whose vent clip tightens with a screw rather than a spring, with a published 24-month warranty - the longest term of any mount in this group. A screw clamp is the right mechanism for a heavier phone, which is what a phone with a grip on the back is. What vanva publishes about grips specifically is nothing: the claim is big phones and thick cases.
- Grip accommodation
- Stated big phones and thick cases; no figure
- Attachment
- Screw-tightened vent clamp with rubber hook
- Adjustment
- 360-degree swivel head
- Release
- Instant-release button
- Warranty
- 24 months
- Load rating
- Not published
- Operating range
- Not published
- Phone size range
- Not published
List price $9.99 per Amazon listing, November 7, 2026, captured on the compile date below. Not a live price and not what you will pay — the button is where the real number is.
What it gets right
- 24-month warranty published, the longest in this group
- Screw-tightened vent clamp rather than a spring clip, which holds a heavier phone better
- Instant-release button and a 360-degree swivel head
- Anti-slip rubber pads and a support shelf, stated
- The cheapest mount in this group
Flaws
- No grip-thickness figure, no load rating, no operating range published
- Big phones and thick cases is the whole fitment claim
- Vent-only
- Stability increase 5 times is a marketing number with no baseline
The working behind the 8.6
- Heat headroom: not scored (weight 22%)
- The maker publishes no operating-temperature ceiling, so this axis is dropped and the other weights are re-normalized.
- Install effort: 9.0 (weight 24%)
- Clips onto a vent blade or a headrest post. Two minutes, no tools, no adhesive, no residue.
- Price against the ceiling: 10.0 (weight 24%)
- Listed at $9.99 on the compile date. This site's buyer has a practical ceiling around $150 for a single upgrade, so the scale rewards everything under $100 and falls away sharply past $150. The live price is very often different, and that is what the button is for.
- Written commitment: 8.0 (weight 15%)
- 24-month warranty. This is the only promise in the entire listing that a court would read, which is why it is scored and the marketing copy is not.
- Spec transparency: 6.3 (weight 15%)
- 5 of the 8 specifications we went looking for are published by the maker (63%). A blank row is never a guess here: it prints “Not published” and it costs the product points, because a figure nobody will commit to in writing is a figure you cannot check.
Axes with no published input are dropped and the remaining weights re-normalized, so a product is not punished for a category where an axis does not apply. Specifications compiled September 4, 2026 from the vanva B1 listing.
5MagSafe PopGrips only - read the compatibility line
PopSockets Car Vent Phone Mount
The mount PopSockets makes, and the one most people buy on the name alone. Its own listing states the limit in plain words: it works with MagSafe PopGrips and MagSafe-compatible cases, and it is not compatible with PopWallets or non-MagSafe grips. If what is on the back of your phone is a classic collapsible PopSocket, the maker's own mount is the wrong product, and nothing else in this group says so about itself.
- Grip accommodation
- MagSafe PopGrips and MagSafe cases only; NOT PopWallets or non-MagSafe grips
- Attachment
- Vent clip with rotating prongs for blade gap
- Orientation
- Portrait or landscape, vertical or horizontal vents
- Warranty
- Not published
- Load rating
- Not published
- Phone size range
- Not published
- Operating range
- Not published
List price $14.99 per Amazon listing, November 7, 2026, captured on the compile date below. Not a live price and not what you will pay — the button is where the real number is.
What it gets right
- Made by PopSockets, and it works with every MagSafe PopGrip
- Rotating prongs, so the vent gap is set to the blade rather than hoped at
- Holds in portrait or landscape on vertical or horizontal vents
- States its own incompatibility explicitly, which is more than most listings manage
Flaws
- Not compatible with PopWallets or non-MagSafe grips, per PopSockets
- No warranty term published - the warranty field says to contact PopSockets
- No load rating, no phone size range, no operating range published
- Fifteen dollars for a vent mount with fewer published numbers than a ten-dollar one
The working behind the 8.3
- Heat headroom: not scored (weight 22%)
- The maker publishes no operating-temperature ceiling, so this axis is dropped and the other weights are re-normalized.
- Install effort: 9.0 (weight 24%)
- Clips onto a vent blade or a headrest post. Two minutes, no tools, no adhesive, no residue.
- Price against the ceiling: 10.0 (weight 24%)
- Listed at $14.99 on the compile date. This site's buyer has a practical ceiling around $150 for a single upgrade, so the scale rewards everything under $100 and falls away sharply past $150. The live price is very often different, and that is what the button is for.
- Written commitment: not scored (weight 15%)
- No warranty term published, so this axis is dropped and the other weights are re-normalized.
- Spec transparency: 4.3 (weight 15%)
- 3 of the 7 specifications we went looking for are published by the maker (43%). A blank row is never a guess here: it prints “Not published” and it costs the product points, because a figure nobody will commit to in writing is a figure you cannot check.
Axes with no published input are dropped and the remaining weights re-normalized, so a product is not punished for a category where an axis does not apply. Specifications compiled September 4, 2026 from the PopSockets Car Vent Mount listing.
6A lifetime warranty on the wrong mechanism for this page
OtterBox Performance Car Dash and Windshield Mount for MagSafe
Skip this one. The best-built mount here and the one that cannot do the job. Magnetic mounting needs a flat back and a PopSocket is a knob in the middle of it, so a MagSafe mount works only if the grip comes off - which is the thing you were trying to avoid. Buy it the day you retire the grip; until then, buy a cradle that holds the phone by its sides.
A limited lifetime warranty, a suction base with a removable adhesive and an optional permanent dash disc, from the one brand on this page with a real warranty department. It is also a magnetic mount, and a magnetic mount needs a flat back. A PopSocket is the opposite of a flat back. This is the best-made product in this group and the wrong answer to this page's question.
- Grip accommodation
- None - magnetic mounting needs a flat back
- Attachment
- Suction with removable adhesive; optional permanent dash disc
- Hold
- MagSafe magnetic alignment
- Orientation
- Portrait or landscape
- Part number
- 78-80518
- Warranty
- Limited lifetime
- Load rating
- Not published
- Operating range
- Not published
List price $40.46 per Amazon listing, November 7, 2026, captured on the compile date below. Not a live price and not what you will pay — the button is where the real number is.
What it gets right
- Limited lifetime warranty - the longest term of any mount in this group by a wide margin
- Suction base with removable adhesive, plus an optional permanent dash mounting disc
- Strong magnetic alignment, holds in portrait or landscape
- OtterBox has an actual warranty channel behind it
Flaws
- It is a MagSafe mount. A grip on the back of the phone stops the magnets reaching the case
- $40.46, the most expensive mount in this group
- Best results need an OtterBox MagSafe case, per the listing
- No load rating and no operating range published
The working behind the 7.9
- Heat headroom: not scored (weight 22%)
- The maker publishes no operating-temperature ceiling, so this axis is dropped and the other weights are re-normalized.
- Install effort: 7.0 (weight 24%)
- Suction cup onto glass or a dash disc. Reversible, but it wants a clean surface and it is the mount type most likely to let go on a hot day.
- Price against the ceiling: 9.0 (weight 24%)
- Listed at $40.46 on the compile date. This site's buyer has a practical ceiling around $150 for a single upgrade, so the scale rewards everything under $100 and falls away sharply past $150. The live price is very often different, and that is what the button is for.
- Written commitment: not scored (weight 15%)
- No warranty term published, so this axis is dropped and the other weights are re-normalized.
- Spec transparency: 7.5 (weight 15%)
- 6 of the 8 specifications we went looking for are published by the maker (75%). A blank row is never a guess here: it prints “Not published” and it costs the product points, because a figure nobody will commit to in writing is a figure you cannot check.
Axes with no published input are dropped and the remaining weights re-normalized, so a product is not punished for a category where an axis does not apply. Specifications compiled September 4, 2026 from the OtterBox Performance mount listing.
Prices last verified November 7, 2026. They move constantly; the figure on Amazon when you click is the real one.
Questions people actually ask
Do PopSockets work with car mounts?
Not with magnetic or wireless-charging mounts, because both need the back of the phone flat against the mount. They work fine with cradle mounts that hold the phone by its edges, and best with cradles that have a shaped recess for the grip - the pop-tech vent mount and the JCTRIWAY suction mount are both built that way.
Can you use MagSafe with a PopSocket?
Only with a MagSafe PopGrip, which attaches magnetically and comes off, leaving the case clear for the mount. A classic adhesive PopSocket blocks MagSafe entirely. PopSockets' own Car Vent Mount states this: it works with MagSafe PopGrips and MagSafe-compatible cases, and is not compatible with PopWallets or non-MagSafe grips.
What kind of car mount works with a phone grip?
A cradle - something that holds the phone by its sides and leaves the back alone. The best versions have a deliberate U-shaped cutout so the expanded grip drops into it and the phone sits flat instead of tipping. The pop-tech mount is the only one on this page that publishes the grip thickness it accepts, at under and over 0.3 in.
Will a PopSocket stop wireless charging in the car?
Yes. Wireless charging needs the charging coil close to and aligned with the coil in the phone, and a grip holds the phone away from the pad. There is no mount that solves this - if you want wireless charging in the car, the grip has to be a magnetic one you remove, or it has to go.
Are cradle mounts worse than magnetic mounts?
They are slower - a magnet takes and releases the phone one-handed and a cradle usually needs two - and they are less convenient to aim. What they do better is hold anything, regardless of what is on the back of the phone or how thick the case is. For a phone with a grip, that is the only trade available.
Sources
- Published grip-thickness threshold, clip reach and included pads for the pop-tech vent mount
- Published holding figure, adjustment range and warranty for the JCTRIWAY socket mount
- Published hook extension, vent blade ceiling, phone size and operating range for the Lamicall STCD06
- Published clamp mechanism and warranty term for the vanva vent mount
- Published grip compatibility and exclusions for the PopSockets Car Vent Mount
- Published mounting options and warranty for the OtterBox Performance MagSafe mount